First-time Setup
Configure the drive once over a USB-to-RS232 cable before use.
What you need
USB-to-RS232 cable
A computer running Chrome or Edge
24V drive power
Steps
Connect the cable from your computer to the drive’s RS232 port
Open the drive configuration tool
Press Connect and pick the device in the browser dialog
Warning
Always Read before you Write. Check the current value before overwriting it. Setting peak current above the motor’s rating will burn the motor.
Values to set
Setting |
Value |
Note |
|---|---|---|
Node ID |
1 or 2 |
Must be unique per drive |
CAN Baudrate |
50 |
Means 500 kbps — must match the controller |
When finished, press Save and power-cycle the drive or the values are lost.